The much anticipated issue of CoroCoro... Is here (ok, i am slow lol)
This issue has once again little coverage on Beyblade on its cover.
only a small image of Ginga on the bottom left corner, so do take note.
The reason why this issue is quite 'hot'? It features the much awaited sneek review of the new Diablos Nemesis bey! "The Completion of the Diablos Nemesis!" "All Beys fused into one!"
The Diablo is a complex 2-tier interchangable 4D Metal Wheel with no symetrical surface. This means the attribute of this MW is pretty much unpredictable since no surface area is the same!
There are 14 Bey "attributes" in the Diablo Nemesis CW/MW alone!
the Nemesis CW fuses "Jade Jupiter, Dio Uranus and XXX Signus (new bey)" = 3
the Diablo MW top tier fuses parts from "Beat Lynx, Fang Leone and Phantom Orion" = 3
the lower MW tier fuses parts from "Ldrago Destroy, BigBang Pegasis, Variares, Flame Sagitario, Scythe Kronos, XXXHades (rbv9), Blitz Unicorno and Death Quetzalcoat. = 8
All together 14 Beys!!! No details about its 4D Track and Bottom is released yet thou. It will be feature in next month's issue. Hope that it will be a gimmick part~
The new Duo Uranus 230WD is also featured.
The Duo MW is a 2-tier Counter Weight shift Metal Wheel. Basically the Duo MW can interchange between 2 modes.
in Stamina Mode, the top tier of the Duo MW is aligned perfectly with its lower MW, creating a solid 2 layer MW with equal weight distribution.
in Attack mode, the top MW is slightly shifted outwards on one side of the MW, creating a weight shift effect like the Basalt MW. Due to the mono sided weight the MW will cause the Bey to move around in the Stadium instead of staying in the Center like the Stamina Mode.
Will review more once the DX Ultimate Reshuffle Set set arrive~
Next bey after all the Bearing Madness...
BB-119 Death Quetzalcoatl 125RDF
Contents Include:
FaceBolt (Blank)
Quetzalcoatl Clear Wheel
Death 4D 2-Tier Metal Wheel
125 Track
Rubber Defence Flat Bottom
Light Launcher 2 with Ripcord
Stickers & Instructions
Tool
The Death MW is known as the "wall" in the 4D series of Bey due to its high MW height (in Attack Mode).
Death 4D MW is a 2-Tier inter flip capable MW system that ables 2 mode changes, Attack and Defence.
In Attack Mode, the Death is a tall, metal 'Wall' with many indents and jaggered design on its surface. Its 'crown-like' design maximises its attack capabilities to taller opponents and the hollow grooves in the lower tier depletes opponents spin ratio greatly when in contact with another MW.
In Defence Mode, the top metal ring is flipped over to conceal the hollow grooves on the lower metal wheel forming a thick and round MW. The small displacement between the 2 MWs retains a little 'Recoil' capability.
The Qestzalcoatl also introduce yet another new Rubber-based bottom after the Rubber Ball, the Rubber Defence Flat (RDF). the RDF, in a simple way is a crossover between the Flat bottom and a 'seasoned' Rubber Sharp bottom.
When launched, the RDF performs similar to a Flat, making small circular motion around the mid section of the Bey Stadium.
When countered by another Bey, the RDF functions like a Rubber Sharp, making it very difficult for the opponent Bey to move the Quetzalcoatl from its position.
The RDF, surprisingly holds a little Stamina capability in it despite it being a rubber Flat bottom, of course don't expect any fantasic Bearing Drive like stamina ya.
Overall, the Death Quetzalcoatl 125RDF is quite an all rounder when it comes to Attack and Defence capabilities. With the right Track and Bottom configurations could be quite a good Attack or Defence Bey. The design on the Death MW also make it a must have for any collector. Good Bey to add to the stash~
A week late, but i guess this issue is a must to review~
CoroCoro Comic November Issue
This month's issue has practically no Bey related images printed on its cover. The only clue you can get is on the middle of the cover, a super tiny image of ginga under the green words. (yup, thats all)
Why the review? This issue talks about the Final Forms of Pegasis and Ldrago!
Jap top: "Pegasis and Ldrago Final Upgrade Transformation!!"
Jap bottom: " Wing Pegasis 90WF and Ldrago Guardian S130MB is Born!!"
The Big Bang Pegasis, known for its Attack 'wings' given an even more powerful "One Strike" explosive Attack design. The Ldrago Destroy, defence/absorb capabilities are also given a massive 'Defence Type' Upgrade. I guess this means we will be expecting 'Recoil' capabilities added to both MWs.
A look at the new Wing Pegasis 90WF, no doubt the mode changing capabilites are forsaken and a more 'upper type' slope design is added to the Wing MW. The triangular piece of MW between the sloped Upper Wings must be the source of the mentioned "One Strike" capability. Similar to Blitz Unicorno's attack Fins, the added "fins" between the Sloped Wings will deliver a 'recoil' attack upon impact.
The Ldrago Guardian S130MB on the other hand is Upgraded to become a more balanced defensive type bey instead of an Attack type. I find the design of the MW similar to the Ldrago 'Rush Mode' minus the jaggard thorns. Since it was mentioned that the new MW will have more powerful 'Defensive' capabilities, my guess iis that it will be hollowed to some extend to propelle a powerful 'recoil' on its opponent. The Absorbing Rubber/PC portion of the MW still remain unchanged.
A small preview of a 3 Bey is also included, as many already mentioned, its probably Uranus. More review on it will be released in next month's issue. What known so far is that it has a 2-tier spiral shaped MW and comes with a 230 Track.
All 3 new beys comes in a DX Ultimate Reshuffle Set, to be released in Late November.
The next page reviews newly released Death Quezacolt 125RDF.
The 4D Death MW is known as the "Rotating Wall". Its so due to its height in MW compared to thinner MWs like Flame, Thermal, Scythe and Forbidden. The Death MW is able to change between two modes by flipping the top tier MW ring.
In Attack Mode, the uneven design on the surface during Attack Mode, degrades the opponent spin ratio greatly upon contact.
In Defence Mode, The grooves on the MW are 'closed' or 'hidden', this minimises surface impact, increasing stamina.
The New 4D Bottom is 'Rubber Defence Flat' (RDF). As clique as it sounds, RDF is the only rubber bottom with a 'Balance Type' catagory rating. The RDF is able to deliver a vigorous Attack motion like RF, Defence capabilities like RB and Stamina abilities like RS. An all-rounder to tackle any opponent types.
As much as i wish that Death Quezacolt and its RDF not ending up like Jade Jupiter (in the shelf...) I can't help but feel doubtful about how great it is. Will have to test it out to convince i guess.
A page on the New Home Edition Ultimate Beyta Stadium!
The Ultimate Beyta Stadium comes with a Prototype Nemesis Bey that have a magnetic core~ this is so to enable the Beyta Stadium to 'Power' up the Bey whenever it goes to the center. Yes, there is a rotating magnetic 'power point' in the center of the Stadium. The direction of the "power point" and height of the Prototype Nemesis is also adjustable to acustom to all kinds of training enviroment. Great Bey Stadium to have for training without peers ya.
in promotion to the new release in Japan, all 1st batch of the Ultimate Beyta Stadium purchase from the official Beyta Shops in Japan will come with a Limited Big Bang Pegasis Blue Wing Version. (Please Note that this is ONLY in Japan during the promo period.)
last but not least, the epic most anticipated Bey in 4D history! Diablo Nemesis!
According to 'Backdoor News' the Diablo MW is a very detailed and complex designed MW with Big Bang Pegasis, Ldrago Destroy and Fang Leone as its main motive with function elements from Blitz Unicorno, Phantom Orion, and Uranus. Its Track and Bottom are fusions of Variares, Scythe Kronos, Jade Jupiter, Beat Lynx and Death Quezacolt. Very WTH indeed. too bad we must wait till the next issue to see its Full Released Image.
In total there are 14 Beys in its motive design, can't wait to see it all come together ya~
For now, how many Beys can you find in its complex Face Design?
The long awaited "bearing system" is finally re-invented~!
BB-118 Phantom Orion Bearing Drive (B:D)
The Phantom Orion B:D is the Only 4D bey that uses a Ball Bearing Shaft in its Fusion Track/Bottom.
Contents Includes:
FaceBolt (Blank)
Orion Clear Wheel
Phantom 4D Metal Wheel
Bearing Drive 4D Fusion Track/Bottom
Light Launcher 2 (Black) with Rip Cord
Stickers & Instructions
Tool
The Phantom 4D Metal Wheel consist of a 2 piece system that allows the Metal Wheel ring to flip between 2 modes:
The Stamina Mode
Only revealing its gradual slope surface, the Phantom in Stamina Mode minimises critical friction between Metal Wheels during a battle. Spin ratio damage minimised = Stamina Up!
The Attack Mode
In Attack Mode, the Phantom MW inverts into a Jaggered surfaced form that inflicts damage to the opponent upon contact. Stamina Mode surface allows Smash Attack to lower opponents.
The Phantom MW is also the Only Metal Wheel that has a full External Weight Distribution design. This means that All the weight of the MW is concentrated only in the outer circumference of the MW, similiar to the Scythe MW but better in performance.
The long awaited part in the history of beyblades is finally here, the Bearing Drive!
The B:D is basically a Free Spinning WD but with a Ball Bearing Core is in the shaft to minimise surface friction that will reduce much needed stamina in a battle. The Bearing Drive also ables the Phantom Orion to recover from attacks with minimum spin ratio loss by absorbing its damage into its free spinning WD bottom.
Trial Tests
To test the Stamina Capabilites of the Phantom Orion B:D, the bey is put thru a stamina test in a standard attack stadium and timed. Results are as follows:
Test 1 - 4mins 23seconds
Test 2 - 5mins 12seconds
Test 3 - 6mins 59seconds
The best timing recieved was only 6mins 59seconds, yes it is pretty long out of the box but i have seen better reviews with 8minute to 9minute results.
During the trial, a ratttle sound was noted, it is caused by the wobbling of the inner shaft. To make things worst the top end of the Bearing Drive is a Flat Contact Surface that actually comes in contact with the inner shaft surface degrading its free spinning ratio greatly. Since modifications are NOT allowed in bey competitions, the only option is to season the part as much as one could. But that will also means launching the bey many times and the constant impact to the bearing might damage the part before you even season it...so how to one season the bearing effectively without damaging the part?
So here is the "How To" section that many fellow bladers have been asking.
First prepare a small strip of cardboard, some blutack and your B:D.
Cut 2 small slits 1/3 into the center of the strip of cardboard and fold to create a "Fin".
Yes, we are basically making a propeller that uses wind power to drive the bearing to turn.
Next attach the fin to the B:D by using the Blutack.
Attach new B:D wind propeller near a fan or wind source and its done. Just leave the part to 'season' for a day or so before applying a drop of mineral oil and repeat process till you are satisfied with the results.
Overall the Phantom Orion B:D is without a doubt the best designed 4D bey with the most longest stamina. Although there are some setbacks on the Bearing Drive System, it can be retified with some 'seasoning'. Since the Phantom Orion is the Only Bey with a Ball Bearing system, it makes this bey a must have to any blader and collector. So get yours today ya~
